EIGRP

ROUTER 1

Konfigurasi Ip

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 172.16.1.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upexit
Router(config)#int ser2/0
Router(config-if)#ip add 172.16.3.1 255.255.255.252
Router(config-if)#clock rate 64000
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit
Router(config)#int ser3/0
Router(config-if)#ip add 192.168.10.5 255.255.255.252
Router(config-if)#clock rate 64000
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#exit
Router(config)#

Konfigurasi EIGRP

Router>
Router>EN
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router eigrp 10
Router(config-router)#network 172.16.1.0 0.0.0.255
Router(config-router)#network 172.16.3.0 0.0.0.3
Router(config-router)#network 192.168.10.4 0.0.0.3
Router(config-router)#exit
Router(config)#

Konfigurasi BANDWIDTH

Router(config)#int ser2/0
Router(config-if)#bandwidth 2048
Router(config-if)#exit
Router(config)#int ser3/0
Router(config-if)#bandwidth 56
Router(config-if)#exit
Router(config)#


ROUTER 2

Konfigurasi Ip

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#int ser 2/0
Router(config-if)#ip add 172.16.3.2 255.255.255.252
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to up
Router(config-if)#exit
Router(config)#int se
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to upr
% Incomplete command.
Router(config)#int ser3/0
Router(config-if)#ip add 192.168.10.9 255.255.255.252
Router(config-if)#clock rate 64000
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#exit
Router(config)#

Konfigurasi EIGRP

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router eigrp 10
Router(config-router)#network 172.16.3.0 0.0.0.3
Router(config-router)#network 192.168.2.0 0.0.0.255
Router(config-router)#network 192.168.10.8 0.0.0.3
Router(config-router)#exit

Konfigurasi BANDWIDTH

Router(config)#int ser2/0
Router(config-if)#bandwidth 2048
Router(config-if)#exit
Router(config)#int ser3/0
Router(config-if)#bandwidth 2048
Router(config-if)#exit
Router(config)#


ROUTER 3

Konfigurasi Ip

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#int ser2/0
Router(config-if)#ip add 192.168.10.6 255.255.255.252
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to up
Router(config-if)#exit
Router(config)#int
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
% Incomplete command.
Router(config)#int ser3/0
Router(config-if)#ip add 192.168.10.10 255.255.255.252
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up
Router(config-if)#exit
Router(config)#

Konfigurasi EIGRP

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router eigrp 10
Router(config-router)#network 192.168.10.8 0.0.0.3
Router(config-router)#network 192.168.10.4 0.0.0.3
Router(config-router)#network 192.168.1.0 0.0.0.255
Router(config-router)#exit
Router(config)#

Konfigurasi BANDWIDTH

Router(config)#int ser2/0
Router(config-if)#bandwidth 56
Router(config-if)#exit
Router(config)#int ser3/0
Router(config-if)#bandwidth 2048
Router(config-if)#exit
Router(config)#

 Konfigurasi ip host 1

Konfigurasi ip host 2

Konfigurasi ip host 3